Tung-Sol 6V6GT matched pair

In stock

Tung-Sol 6V6GT matched pair

Tung-Sol 6V6GT beam powertetrode still used in many guitar amps and headphone amplifiers.
Set of two.

This item is in stock;
Ordered before 16 PM will be shipped the same workday;
All prices are including VAT;
Need help? Please contact us.

More Information
Tube type 6V6
Manufacturer/Brand Tung-Sol
Production New
Tube kind Powertube
Construction Beaming Tetrode
Pin Layout Octal 8 pins
Country of Manufacture Russia

Tung-Sol 6V6GT matched pair
The 6V6G (T) was initially developed by Ken-Rad and Raytheon in 1936 as a smaller version of the 6L6 especially for use in (car) radios to replace the 6F6 pentode. The 6V6 beam tetrode is still used in many smaller guitar amps and also used in modern headphone amplifiers as the output tube.

The T behind Glass G indicates that this is the smaller glass housing (T9)

Tung-Sol Lamp Works was founded in 1907 in Newark, NJ USA. The name Tung-Sol is a contraction of Tungsten or tungsten the element where the filaments in tubes and light bulbs are made and Sol what in Latin means sun. Advertising for Tung-Sol car bulbs Since the 1920s, Tung-Sol also started producing other electronic products, including electron tubes. Tung-Sol strived for perfection of its products by means of a manufacturing process under laboratory standards and strict quality control. The best known tube from Tung-Sol is the 6550 marketed in 1955 in response to the Genalex / Marconi KT88. The 6550 is a so-called 'beam tetrode' and can be found in amplifiers with a lot of power, for example in the Ampeq SVT bass amplifiers and Marshalls 50 and 100 Watt guitar amplifiers for the American market.

In addition to the our 6V6GT from Tung-Sol, we also sell the premium 6V6GT / CV511 from Genalex and 6V6’s from Electro Harmonix and TADMatched tubes 

This set of tubes is matched. This means that the measured values of the tubes fall within the same range and thus perform equally.
This is important for two reasons:
1. To obtain the same gain factor per tube.
2. For the same amount of quiescent current per tube.
The first requirement speaks for itself and the second requirement prevents the one tube where a higher quiescent current or bias is needed to make it work in the linear region will also be worn out earlier. Both new tubes and our NOS tubes can be ordered separately.